Home/Products/PPG/Zinc-Rich Primers/PPG SIGMAZINC 100

PPG SIGMAZINC 100

PPG · Zinc-Rich Primers

PPG SIGMAZINC 100PPG · Zinc-Rich Primers Request a quote All products from this brand
BrandPPG
FunctionZinc-Rich Primers
Product namePPG SIGMAZINC 100
Product familyPPG
Product rangeppg

Selection & application notes

  • Zinc-rich primers require blast cleaning to Sa 2½, the specified profile, and a soluble-salt check.
  • Inorganic zinc silicates cure on controlled humidity and need sufficient curing time before overcoating.
  • Too low a DFT weakens cathodic protection; too high increases cracking risk — control against the system's total DFT.

These are general notes for the functional category; confirm parameters against the manufacturer's latest TDS.

More from this brand and function

DIMETCOTE 3WDIMETCOTE 9 HDIMETCOTE 9-75SF ZINC PRIMERSIGMAGUARD 750SIGMAZINC 68 SPSIGMAZINC 102 GSIGMAZINC 109 GSIGMAZINC 109 HSSIGMAZINC 109 HS VOC

Equivalent products from other brands

EPOFEND ZINC 60 · KANSAIEPOTAINER ZINC 60 · KANSAISD ZINC 1000HA(S) · KANSAISD ZINC 100QD PRIMER · KANSAISD ZINC 2000 · KANSAISD ZINC PRIMER 1000HA(S) · KANSAISD ZINC PRIMER 1500N · KANSAISD ZINC PRIMER 500 · KANSAI

Typical application scenarios

Bridges and plant steelworkPort machinery and offshore equipment
All products in this function

Not sure which product fits? Tell us the substrate and service conditions

Share your substrate, corrosivity category and target service life — we will come back with a coating system and quantity estimate.

Contact us